Demolition Parts

Showing all 75 results

Demolition Parts Paradise Bar

Categories: , , .
paradise-bar-blk-jacket
  • Tyler Fernengel Signature Handlebar
  • “Send It” sticker on the crossbar exactly like Tyler’s bars
  • Rise: 8.75″ & 9.25″
  • Width: 28.5″
  • Backsweep: 11°
  • Upsweep: 1°
  • Crossbar OD: .75″
  • Crossbar Height: 6.3″ (8.75″) 7″ (9.25″)
  • Crossbar Width: 11″ (8.75″) 11.7″ (9.25″)
  • Material: 13 butted, heat treated CRMO. Thickest point is 1.8t (.070)
  • Weight: 33.2 oz (9″)
Log in for shop prices

Demolition Rig Bar

Categories: , , .
rig-blk-jack
  • Dennis Enarson Signature Bar
  • Rise: 9″ & 9.25″”
  • Width: 29″
  • Backsweep: 12°
  • Upsweep: 2°
  • Crossbar OD: .75″
  • Crossbar Height: 6.5″ (9″) 6.75″ (9.25″)
  • Crossbar Width: 11.28″ (9″) 11.3″ (9.25″)
  • Material: 13 butted, heat treated CRMO. Thickest point is 1.8t (.070)
  • Weight: 34 oz
Log in for shop prices

Demolition Parts Royal Park Fork

Categories: , , .
fork-royal1
  • Light Weight Park Fork
  • Full 100% 4130 Heat-Treated CR-MO
  • Ultra Tapered Legs
  • Height: 315mm
  • Built-in Race
  • One piece heat treated CR-MO steerer
  • Built-in steerer race
  • Butted Steerer Tube Length: 163 mm
  • Fork leg slot for peg clearance
  • 4mm Thick Welded Drop Outs
  • Dropout Offset/rake: 26 mm
  • Complete with AL. compression bolt
  • Weight: 29.8 oz
Log in for shop prices

Demolition Parts Kris Fox Fork

Categories: , , , .
fox-fork-black-jacket
  • Kris Fox Signature Fork
  • Full 100% 4130 Heat-Treated CR-MO
  • Tapered Legs
  • Built-in Race
  • One piece steerer
  • Steerer Tube Length: 163 mm
  • Fork leg slot for peg clearance
  • Investment Cast Dropouts
  • Offset: 28 mm
  • Complete with AL. M25 compression bolt
  • Weight: 37.5 oz
Log in for shop prices

Demolition Parts Fork Compression Top Cap

Categories: , , .
top cap combression bolt
  • For 1/8″ Steer Tubes
  • M25 Cap: Fits Demolition forks Maiden & Elite & prior forks (top design may not match picture)
  • M24 Cap: Fits Demolition forks Fox Fork & after (top design may not match picture)
  • Weight: 0.9 oz
  • M25 Cap: Fits 3/8″ Ratchet
  • M24 Cap: Fits 6mm Allen Key
  • 6061 AL
Log in for shop prices

Demolition AXES Grip

Categories: , , , .
grip-axes-group
  • Diameter 31.23mm
  • Mini-Flange Length: 155mm
  • Flange-less Length: 149mm
  • Made from new velo Vex compound for durability and softness
  • Our re-designed nylon barends are included
  • Weight: 4.5 oz (Mini Flange), 4 oz (Flane-less)
Log in for shop prices

Demolition Bar Plugs

Categories: , , , .
barplugs-demo
  • 2 Molded Bar Plugs
  • Durable, Soft, & Inexpensive Compound
  • Also Available in Demolition Grip Purchases
Log in for shop prices

Demolition Axes/Markit Bar Ends

Categories: , , , .
markit-barends-blk
  • Demolition Axes logo on one side and Markit on the other
  • 3 Allen screws on each barend to hold in place
  • Come in pairs
  • Aluminum alloy for durability
  • Weight:
Log in for shop prices

Demolition Parts V2 Headset

Categories: , , .
headsets2
  • 1/8″ Integrated
  • Campy 45ºX45º
  • 8mm & 10mm Stackable Cone Spacers Included
  • Weight: 2.6 oz
Log in for shop prices

Demolition Parts Paradise Stem

Categories: , , .
paradise-stem-blk-jacket
  • Tyler Fernengel signature stem
  • Recessed for ø32 mm Bolt
  • Width:
  • Reach: 50mm & 53mm
  • Stack Height: 33mm
  • Rise: 35mm (upright)
  • Weight:
Log in for shop prices

Demolition Parts Rig Stem

Categories: , , .
rig-stem-blk-jacket
  • Dennis Enarson signature stem
  • Recessed for ø32 mm Bolt
  • Width: 45mm
  • Reach: 53mm
  • Stack Height: 33mm
  • Rise: 32mm (upright)
Log in for shop prices

Demolition Parts Stylus Stem

Categories: , , .
stylus
  • Kris Fox Signature Stem
  • Reach: 50 mm
  • Stack Height: 32 mm
  • Width: 48 mm
  • Rise: 8.5 mm (Upright) / 23.5 mm (Inverted)
  • Recessed for ø32 mm Bolt
  • Weight: 10.0 oz
Log in for shop prices

Demolition Parts Top Lodes Stem

Categories: , , , .
top lodes stem
  • Connor Lodes Signature Stem
  • Reach: 50 mm
  • Width: 50 mm
  • Stack Height: 32 mm
  • Rise: 21 mm (Upright)
  • Recessed for ø32 mm Bolt
  • Weight: 11.1 oz
Log in for shop prices

Demolition Parts Stem Bolt Kit

Categories: , , , .
Demolition Tyler Stem bolt
  • 4130 Heat-Treated Chromoly
  • 6mm Metric Stem Bolts
  • Includes 6 Bolts (4 Front & 2 Back)
Log in for shop prices

Demolition Parts Upper Gyro Plate

Categories: , , , , .
gyro
  • High Grade Aluminum
  • Stack Height: 3 mm
  • Weight:  0.5 oz
Log in for shop prices

Demolition Parts Trooper Plastic Pedal

Categories: , , .
trooper-colors2
  • Designed With Team Input
  • 10 Square Molded Pins
  • Horizontal Concave for Grip
  • Nylon Plastic Body for Extra Life
  • 2 Unsealed Bearings
  • Heat Treated CRMO Spindle
  • Weight: 14.5 oz (pair).
Log in for shop prices

Demolition Parts Trooper AL Pedal

Categories: , , .
pedal-trooper-al-rasta
  • 2 Bushings for Extended Life
  • Slim Designed 6061 T6 CNC Aluminum Body
  • Concave Body for Grip
  • Heat Treated CRMO Spindle
  • Weight: 16.2 oz.
  • 10 Removable Flush Mount Pins
Log in for shop prices

Demolition Parts Matt Cordova Seat

Categories: , , , .
seat-mc
  • Matt Cordova Signature Seat
  • Fat Cap Thick Padded
  • Pivotal & Tripod Styles Available
  • Cordova Patch On Top
  • Synthetic Leather Top
  • Rectangular Motorcycle Style Stitching
  • Plastic Bumpers
  • Post Sold Separately
  • Pivotal Weight: 11.9 oz
  • Tripod Weight: 9.9 oz
Log in for shop prices

Demolition Parts Paradise Seat

Categories: , , , .
180-paradise-maroon-tri
  • Tyler Fernengel Signature Seat
  • Fat Cap Thick Padded
  • Pivotal & Tripod Styles Available
  • 3-pc Fabric Palm Tree Paradise Printed Top
  • Fabric Side Overlays
  • Plastic Bumpers
  • Pivotal Weight: 11.5 oz
  • Tripod Weight: 9.5 oz
Log in for shop prices

Demolition Mike “Hucker” Clark Seat

Categories: , , , , .
seat-hucker-colors
  • Mike “Hucker” Clark Signature Seat
  • Fat Cap Thick Padded
  • Pivotal & Tripod Styles Available
  • Canvas-Like Hawaiian Printed Top
  • Canvas-Like Side Overlays
  • Plastic Bumpers
  • Pivotal Weight: 12.4 oz
  • Tripod Weight: 10.1 oz
Log in for shop prices

Demolition Markit Seat

Categories: , , , , , .
markit tripod white
  • Dennis Enarson Signature Seat
  • Fat Cap Thick Padded
  • Pivotal & Tripod Versions
  • Denim Top w/ Stitched Markit Logo
  • Post Not Included
  • Pivotal Weight: 10.9 oz
  • Tripod Weight: 9.7 oz
Log in for shop prices

Demolition Parts Doyle Anthem Seat

Categories: , , , .
anthem doyle seat
  • Chris Doyle Signature
  • Mid Padded
  • Pivotal Style w/Hollow Bolt
  • Vinyl Top Mimics Ostrich Leather
  • Weight: 10.1 oz
Log in for shop prices

Demolition D Fat Seat

Categories: , , , .
d fat seat
  • Fat Cap Thick Padded
  • Perforated Vinyl Top w/Grippy Rubber Sides
  • Pivotal Style w/Hollow Bolt
  • Weight: 10.9 oz
Log in for shop prices

Demolition Parts Pivotal Post

Categories: , , , , .
pivotal post
  • 25.4mm Diameter
  • Weight: 300mm=7.0 oz
  • Weight: 135mm=3.2 oz
  • Weight: 90mm=2.3 oz

 

Log in for shop prices

Demolition Parts Tripod Post

Categories: , , , .
tripod post
  • 6061 Aluminum
  • Includes Wedge Piece
  • Length: 190mm (7.5″)
  • Weight: 4.5 oz
Log in for shop prices

Demolition Parts V2 Seat Clamp

Categories: , , , , , , .
v2 lightning bolt seat clamp
  • Made from aluminum with a single bolt clamp design
  • 1  1/8”
  • Weight 0.9 oz
Log in for shop prices

Demolition Parts Dennis Enarson 24mm Rig Cranks

Categories: , , .
rig-crank-black-jacket
  • Heat Treated CRMO arms with built in ridge face for added strength and stiffness
  • Forged 24 mm X 48T splined boss that sites flush to prevent ankle scarring
  • 24 mm X 48T splined heat treated CRMO spindle
  • CRMO spindle bolts with 3/8″ ratchet and 6 mm allen keyed by CNC’d
  • 24 mm Mid BB bearings, cones and watchers NOT INCLUDED
  • Available sizes: 170 mm and 175 mm
  • Weight: 31.6 oz. (175 mm)
Log in for shop prices

Demolition Parts Revolt Cranks

Categories: , , .
revolt-black-jacket
  • Sizes (mm): 170 & 175
  • Spindle: 19mm Hollow/ Heat Treated Chromoly
  • Spindle Bolts: 3/8″ x 24T Flush Mount
  • Spindle Splines: 48
  • Sprocket Bolt: 10×1.5mm
  • Weight: 22.2 oz (175mm arms only)
Log in for shop prices

Demolition Crank Spindle Bolt Replacement Sets

Categories: , , , , .
revolt bolts

 

  • Heat-Treated Chromoly, & High Grade Aluminum
  • Revolt 19mm set comes with 2 allen bolts & 2 tapered washers
  • Rig 24mm set comes with 2 allen bolts
  • Check with aurthorized Demolition dealers for other brand compatibility
Log in for shop prices

Demolition Parts 3-pc Crank Spindles

Categories: , , .
spindle-19mm-revolt

 

  • 4130 Heat-Treated Chromoly
  • Length: 127.5mm (5-1/2″)
  • 19mm (3/4″) diameter
  • Check with aurthorized Demolition dealers for other brand compatibility
Log in for shop prices

Demolition Parts Crank Puller

Categories: , , , .
crank puller
  • 4130 Heat-Treated Chromoly
  • 3/8″ Thread End For Spindle
  • 3/8″ Ratchet End with Hex On Opposite End
  • Comes With Spacer
  • 19mm Works w/ Revolt Cranks
  • 24mm Works w/ Rig Cranks
Log in for shop prices

Demolition Parts Mid BB

Categories: , , , , , .
mid bb
  • Mid
  • 19mm
  • Sealed Bearings
  • Crank Arm Spacers & Tube Spacer Included
  • Weight: 6 oz
Log in for shop prices

Demolition Parts Markit Sprocket

Categories: , , .
180-markit-spr-blk
  • Available Teeth: 25t & 28t
  • 24mm Bore with 19mm & 22mm Spacers
  • Teeth: 1/8″
  • Bore: 15/16″
  • Weight:  oz (25T) /  (28T)
Log in for shop prices

Demolition Parts Mugatu Sprocket

Categories: , , .
mugatu
  • Full Heat-Treated 4130 CRMO
  • Available Teeth: 25t & 28t
  • 19mm 48 Splined
  • Teeth: 1/8″
  • Bore: 15/16″
  • Weight: 4.2 oz (25T) / 5.1 (28T)
Log in for shop prices

Demolition Parts Merit Sprocket

Categories: , , , .
merit
  • Available Teeth: 25t, 27t, 28t & 30t
  • Teeth: 1/8″
  • Bore: 15/16″
  • Splined or Bolt Option
  • Splined Option: 19mm 48 Splined
  • Bolt-On Adapter: 19 & 22mm included
  • Weight: 1.9 oz (25T)
  • *Cranks & Chain Not Included
Log in for shop prices

Demolition Parts Chain Tensioner

Categories: , , , .
chain tensioner
    • 14mm Bore
    • Weight: 0.7 oz
Log in for shop prices

180 Dist. Dealer Pack

Categories: , , , , , .
price-list-pic
  • 1 Dealer Price List containing all Wholesale/MSRP’s for Demolition, Volume & Resist.
Log in for shop prices

Demolition Parts Stickers

Categories: , , , , .
stickers11
  • 8.5″X11″ Sticker sheets. Available in either black or white sheets. 1 Sheet per quantity.
  • Misc sticker packs. Total of a 10 misc sizes and colored stickers.
  • Big 20″X5″ Demolition shop/ramp sticker. Black/White only.
  • Sticker Sheets and 10pc Packs are Always Changing. May Be Different From Pictured.
Log in for shop prices

Demolition Posters

Categories: , , , .
kp poster

Features:

  • Logo Poster 24″ x 36″
  • Rider Posters 18″ x 24″
  • Front Print Only
  • Aqueous coated paper
  • Kris Fox Poster is Folded Posterlog. Parts On Backside.
  • Kris Fox Poster is Only Poster With Parts on it. All Others are Blank Back.
Log in for shop prices

Demolition Parts Banner

Categories: , .
banner-demo
  • Vinyl PVC
  • 15″ x 47″
  • 4 Reinforced Holes for Hanging
  • Josh Clemens Model Not Included
  • Weight: n/a
Log in for shop prices

Demolition Bulimia V3 Hub

Categories: , , .
bulimia-v3-2
  • Slider Front Guard sold separately & pops right on top of the cone
  • Spacing: 100 mm
  • Front Axle Type: 3/8″ Male Heat Treated CR-MO
  • Hub Flange Diameter: 38 mm
  • Hub Center to Flange: 34 mm
  • Weight: 7.6 oz.
  • *Logos May Vary
Log in for shop prices

Demolition Ghost V2 Hub

Categories: , , .
ghost-blk-jacket
  • Spacing: 100 mm
  • Front Axle Type: 3/8 Bolt On Female
  • Hub Flange Diameter: 38 mm
  • Hub Center to Flange: 34 mm
  • 7075 AL Thread on Hub Guard Sold Separate
  • Slider PC Front Guard Sold Separate (PC pops right on top of the cone)
  • Weight: 9.6 oz.
Log in for shop prices

Demolition Rogue Cassette Hub

Categories: , , .
rogue
  • Spacing: 110 mm
  • Rear Axle Type: 14mm
  • Hub Flange Diameter: 27 mm
  • Hub Center to Flange: 49 mm
  • Axle ends come with allen key insert for easy installation
  • Available in RHD & LHD
  • Available in either 9t or 10t drivers
  • 7075 AL Thread on Hub Guard Sold Separate
  • Weight: 14.4 oz (w/ 9t CR-MO driver)
Log in for shop prices

Demolition Rolls V2 Hub

Categories: , , .
rolls v2 straight male
  • Spacing: 110 mm
  • Rear Axle Type: 14mm
  • Pitch Center Diameter (PCD): Drive side: ø51.5mm Non Drive Side: ø45
  • Hub Center to Flange: 27 mm
  • Hub Shell Bearing Type: QTY-2 #6902
  • Available in either 9t or 10t drivers
  • Comes stock as RHD
  • Sold separate: Solid 14mm axles & 7075 AL screw-on hub guard
  • Weight: 15.6 oz (w/ 9t CR-MO driver)
  • *Female Rear Hubs Not Recommended For Peg/Grind Use
Log in for shop prices

Demolition Rotator V2 Hub

Categories: , , .
rotator-black-jacket
  • Spacing: 110 mm
  • Rear Axle Type: 14mm Solid
  • Pitch Center Diameter (PCD): Drive side: ø57.5mm Non Drive Side: ø57.5
  • Hub Center to Flange: 26.4 mm
  • Hub Shell Bearing Type: 6002 (x1) non-drive side, 7905  ACB (x1) drive side
  • RHD or LHD
  • Includes 3 slack adjustment washers that adjusts freecoaster slack
  • Click HERE to view slack degrees you can get by adding or taking out slack washers
  • Available in 9t driver only. Driver Bearings: Qty 1- 7802-14 & 1 needle bearing
  • Sold separate: Solid 14mm axles & 7075 AL screw-on hub guard
  • Weight: 23 oz (w/ 9t CR-MO driver)
Log in for shop prices

Demolition Rolls V2 Hub *CLEARANCE

Categories: , , , .
rolls v2 female
  • Spacing: 110 mm
  • Rear Axle Type: 14mm
  • Pitch Center Diameter (PCD): Drive side: ø51.5mm Non Drive Side: ø45
  • Hub Center to Flange: 27 mm
  • Hub Shell Bearing Type: QTY-2 #6902
  • Available in either 9t or 10t drivers
  • Comes stock as RHD
  • Sold separate: Solid 14mm axles & 7075 AL screw-on hub guard
  • Weight: 15.6 oz (w/ 9t CR-MO driver)
  • *Female Rear Hubs Not Recommended For Peg/Grind Use
Log in for shop prices

Demolition Slider Plastic Front Hub Guard

Categories: , , , , .
guards-pc-front
  • Comes in 3 different options (Guard, Guard+Bul. Cone, or Guard+Gh. Cone)
  • Cone Options: Bulimia or Ghost Hubs
  • Plastic Guard completely replaceable & sold individually if cone not needed
  • Plastic+nylon compound for low weight, durability, & longevity
  • Colors: Black
  • Replace the cone on the Ghost V1 & Bulimia V1/V2 Hubs
  • Ghost V2 & Bulimia V3 Hubs already come with compatible cones
  • Sold Individually (Hubs Sold Separately)
Log in for shop prices

Demolition Parts Phantom V2 Hub Guard

Categories: , , , , , .
phantom-v2-guard2
  • 14mm Thread to Replace Cone
  • Aluminum  Hub Guard
  • Fits Phantom V2 Hub
Log in for shop prices

Demolition Parts Rear Cassette Hub Guard

Categories: , , , , .
rear-guard
  • 14mm Thread to Replace NDS Cone
  • Aluminum Hub Guard
  • Fits Rogue, Rolls V1 & V2 Hubs
Log in for shop prices

Demolition Rotator Hub Guard

Categories: , , , , , .
rear guard
  • 14mm Thread to Replace NDS Cone
  • Non Drive Side Aluminum  Hub Guard
  • Fits Rotator Hub Only
Log in for shop prices

Demolition Axle Nuts

Categories: , , , , .
nuts-14mm
  • Replacement axle nut sets for front & rear hubs
  • Rear sets available in Chromoly and Aluminum (AL)
  • Rear sets available in 2 Regular Thread Nuts, or 1 Regular Thread & 1 Reverse Thread Nut sets
Log in for shop prices

Demolition Bulimia Hub Parts

Categories: , , , , , .
axle-bulimia2
  • Replacement Pieces for the Demolition Bulimia Hub
  • Cone Set includes 2 Cone Nuts
  • Cone Set Weight: 1 oz
  • Axle Weight: 9 oz
  • Bearing Weight:  1 oz
Log in for shop prices

Demolition Rotator Hub Parts

Categories: , , , , , .
rotator-driver 900x600
  • Replacement Pieces for the Demolition Rotator hub
  • RHD & LHD Driver is 9t needle bearing driver
  • All Bearings are Sealed
  • ACB = Angular Contact Bearing
  • Cone Set includes 1 NDS cone, 1 DS cone, & 1 DS Tapered Washer
  • V1 Axle is for V1 Rotator hub with Sealed Bearing driver
  • V2 Axle is for V2 Rotator hub with Needle Bearing driver
Log in for shop prices

Demolition Bi Polar Peg

Categories: , , , .
bipolar-pegs
  • Axle: 14mm w/ 3/8 Adapter
  • Length: 4.2″ (106.7mm)
  • Available in 7075 AL Core w/1 Outer PC sleeve, or Replacement PC Sleeves, or CRMO heat-treated core.
  • CRMO heat-treated core can be used as regular CRMO peg without sleeve.
  • Sold Individually
Log in for shop prices

Demolition Parts Team Pegs

Categories: , , .
peg_11
  • Colors: Black, Black, & Black
  • Axle: 14mm w/ 3/8 Adapter
  • Length: 4″ (101.6mm)
  • Diameter: 1.5″ (37.4mm)
  • CRMO heat-treated peg
  • Sold in Pairs
  • Weight: 5.9 oz
Log in for shop prices

Demolition Parts Soap Bar Grind Wax

Categories: , , .
wax4
  • Scent: Vanilla
  • Color: White
  • Weight: 6.3 oz
Log in for shop prices

Demolition Parts Zero Rim

Categories: , , .
zero rim
  • Double Wall
  • Aluminum
  • Rim Depth: 12 mm
  • ERD: 389
  • Weight: 17.5 oz
Log in for shop prices

Demolition Parts Rim Strip

Categories: , , , , , .
band_blk
  • Sold in Singles
  • Heavy Duty Nylon Plastic
  • 20″ Diameter
  • Weight 0.9 oz
Log in for shop prices

Demolition Parts Bulimia V3 Front Wheel

Categories: , , .
bulimia wheel
  • 3/8″ Male Axle
  • 36 Hole Wheel
  • Sealed Bearings
  • Slider Front Guard Sold separately & must buy with cone to retrofit V2 Bulimia
  • Weight: 2 lbs. 1.5 oz
Log in for shop prices

Demolition Parts Ghost V2 Wheel – Front

Categories: , , .
ghost wheel
  • 3/8″ Female Bolts
  • 36 Hole Wheel
  • Sealed Bearings
  • 7075 AL Thread on Hub Guard Sold Separately
  • Slider Front Hub Guard Sold Separately & Must Buy With Ghost Cone to Retrofit
  • Weight: 2 lbs. 3.5 oz
Log in for shop prices

Demolition Parts Rogue Cassette Rear Wheel

Categories: , , .
rogue wheel
  • 14mm Male Axle
  • 36 Hole Wheel
  • RHD or LHD
  • 9T or 10T Chromoly Driver
  • Sealed Bearings
  • 7075 AL Thread on Hub Guard Sold Separate
  • Weight: 2 lbs. 6.6 oz.
Log in for shop prices

Demolition Detonator Pump

Categories: , , .
hand-pump1
  • 11″ Micro Hand Pump
  • 120 PSI Gauge
  • Fold out Leg
  • Presta & Schrader
  • Fits easily in backpack or tool pouch
Log in for shop prices

Demolition Parts Dennis Enarson Rig Tires

Categories: , , , .
rig-tire6
  • Available sizes: 2.25 & 2.4
  • New dual density compound that is 20% stronger, and more durable over a longer period of time to prevent rubber hardness or cracks
  • 110 PSI
  • Threads Per Inch (TPI): 60
  • Stronger nylon cord plies to form the body of the tire
  • New 4 cord wire bead steel cables to create a stronger backbone of the tire
  • Weight: 19 oz. (2.35 tire)
Log in for shop prices

Demolition Parts Mike “Hucker” Clark Hammerhead Tire

Categories: , , , .
hammerhead-maroon
  • Mike “Hucker” Clark Signature Tire
  • S (Street) Tread: Low Profile Street/Park Tread
  • T (Trails) Tread: Higher Profile All-Terrain/Dirt Tread
  • High pressure (110 psi), lighter weight, wire bead tire
  • Threads Per Inch (TPI): 60
  • Rectangle tread pattern
  • Both Treads Available in 2.25 & 2.40 Sizes
  • T weights: 25.7 oz (2.25) & 27.3 oz (2.40)
  • S weights: 21.9 oz (2.25) & 26.1 oz (2.40)
Log in for shop prices

Demolition Parts Momentum Tire

Categories: , , , .
momentum-purp
  • Certified Best-Seller***
  • Available sizes: 2.20 & 2.35
  • Brick Street Pattern
  • 110 PSI
  • Threads Per Inch (TPI): 60
  • Weight: 19 oz. (2.35 tire)
  • Note: 2.00 Size Discontinued
Log in for shop prices

Demolition RotatoR V2 Wheel

Categories: , , .
Pro Rotator
  • PRO Version Now Comes w/ Non Drive Side Hub Guard
  • Lite Version Does Not Come w/ Non Drive Side Hub Guard
  • 14mm Male Axle
  • 36 Hole Wheel
  • RHD or LHD
  • 9T Chromoly Driver
  • Sealed Hub Bearings & Needle Bearing Driver
  • 7075 AL Thread on Hub Guard Sold Separate
  • Weight: 3 lbs. 0.9 oz.
Log in for shop prices

Demolition Parts Vulcan V2 Brake

Categories: , , .
vulcan brake
  • 6061 AL Arms CNC’d to Reduce Weight
  • Sealed Bearings for Smooth Pivot
  • Low Profile Spring Adjusters for Clearance
  • Demolition Molded Brake Pads Included
  • Alloy Cable Hanger & Straddle Cable Included
  • Weight: 5.9 oz
Log in for shop prices

Demolition Parts Linear Brake Cable

Categories: , , , .
linear brake cables
  • 1.5mm Inner Cable
  • Barrel End & Cable Caps Included
  • Length:
  • Weight: 0.2 oz
Log in for shop prices

Demolition MFG Camper Hat

Categories: , , .
demo-camo-angle
  • When you wanna be invisible in the streets
  • 5 Panel Camper Style
  • Demolition MFG Woven Label
  • Adjustable Strap
  • Safety Orange not included
Log in for shop prices

Demolition Axes Logo Tee

Categories: , , .
demo-axes2
  • 2017 Spring/Summer
  • Big Axes Logo
  • On Slim fit / soft tee
  • Water based graphic
Log in for shop prices

Demolition Alpha 3/4 Sleeve

Categories: , , .
demo-coyote-both
  • 2017 Spring/Summer
  • 3/4 Sleeve
  • On Slim fit / soft tee
  • Water based graphic
Log in for shop prices

Demolition Jersey

Categories: , , .
demo-00-both
  • 2017 Spring/Summer
  • On Slim fit / soft tee
  • Water based graphic
Log in for shop prices

Demolition Eagle Tee

Categories: , , .
demo-bird-both
  • 2017 Spring/Summer
  • Front and Back Print
  • On Slim fit / soft tee
  • Water based graphic
Log in for shop prices

Demolition Ram Long Sleeve

Categories: , , .
demo-ram2
  • 2017 Spring/Summer
  • Ram Front Pocket Logo
  • Axes Logo Sleeve Print
  • On Slim fit / soft tee
  • Water based graphic
Log in for shop prices

Demolition Mike “Hucker” Clark Hawaiian Pocket Tee

Categories: , , , .
hucker-blk-
  • Anchor’s Away!
  • Broc Raiford Signature
  • 2015 Spring/Summer
  • Small bottom Volume  patch
  • On Slim fit / soft tees
  • Water based graphic
Log in for shop prices