Shop

Showing all 10 results

PRE-ORDER: Volume Bikes 2018 Hessian 26″

Categories: , , .
hessian-whole
  • Frame: Chromoly DT
  • Geometry: 22″ TT, 15.75″ CS, 70.9º HT, & 14″ ST Height
  • Fork: 1pc Chromoly Steerer
  • Bars: Hi-Ten Steel, 6.8″ Rise & 28″ Wide
  • Stem: Volume Staple V2 Top Load
  • Headset: Genesis Sealed Integrated
  • Seat: Demolition Axes Pivotal
  • Seat Post: Pivotal
  • Seat Clamp: Built Into Frame
  • Brakes: Odyssey Springfield
  • Brake Lever: Odyssey Springfield
  • Brake Cable: Linear
  • Grips: VLM Flanged w/VLM Bar Plugs
  • Cranks: Genesis Octagon Squared 48-Splined 3pc Tubular Chromoly 175mm
  • Chainring: 25t
  • Bottom Bracket: Sealed Mid 19mm
  • Pedals: Odyssey Twisted PC
  • Front Rim: Genesis Turbine Single Wall 36h
  • Rear Rim: Genesis Turbine Double Wall 36h
  • Front Hub: Genesis Turbine Unsealed 3/8″
  • Rear Hub: Genesis Turbine Sealed 14mm Cassette w/sealed 10t Driver
  • Chain: KMC Z410
  • Tires: Maxxis, Holy Roller 26x 2.4” (Front & Rear)
Log in for shop prices

Volume Mad Dog 4pc Bar

Categories: , , .
mad-dog-nw-green
  • Re-issued & Updated
  • Rise: 9″
  • Width: 29″
  • Backsweep: 11°
  • Upsweep: 1°
  • Crossbar OD: 0.75″
  • Crossbar Height: 7.2″
  • Crossbar Width: 11.7″
  • Material: 13 butted, heat treated CRMO. Thickest point is 1.8t (.070)
  • Thunder Blue due Early December
Log in for shop prices

Volume Broc Raiford Captain Bar

Categories: , , .
bar-captain-glacier-blue
  • Broc Raiford Signature Bar
  • Rise: 9″ & 9.25″”
  • Width: 28.5″
  • Backsweep: 10°
  • Upsweep: 2°
  • Crossbar OD: .75″
  • Crossbar Height: 6.75″
  • Crossbar Width: 11.3″
  • Material: 13 butted, heat treated CRMO. Thickest point is 1.8t (.070)
  • Weight: 33.5 oz
Log in for shop prices

Demolition Parts Paradise Bar

Categories: , , .
paradise-bar-blk-jacket
  • Tyler Fernengel Signature Handlebar
  • “Send It” sticker on the crossbar exactly like Tyler’s bars
  • Rise: 8.75″ & 9.25″
  • Width: 28.5″
  • Backsweep: 11°
  • Upsweep: 1°
  • Crossbar OD: .75″
  • Crossbar Height: 6.3″ (8.75″) 7″ (9.25″)
  • Crossbar Width: 11″ (8.75″) 11.7″ (9.25″)
  • Material: 13 butted, heat treated CRMO. Thickest point is 1.8t (.070)
  • Weight: 33.2 oz (9″)
Log in for shop prices

Demolition Rig Bar

Categories: , , .
rig-blk-jack
  • Dennis Enarson Signature Bar
  • Rise: 9″ & 9.25″”
  • Width: 29″
  • Backsweep: 12°
  • Upsweep: 2°
  • Crossbar OD: .75″
  • Crossbar Height: 6.5″ (9″) 6.75″ (9.25″)
  • Crossbar Width: 11.28″ (9″) 11.3″ (9.25″)
  • Material: 13 butted, heat treated CRMO. Thickest point is 1.8t (.070)
  • Weight: 34 oz
Log in for shop prices

Volume Bikes Broc Raiford Anchor V2 Fork

Categories: , , .
anchor-nw-grn
  • Broc Raiford Signature
  • One Piece Steerer w/Tapered Legs
  • Steerer Tube: 1-1/8″ Threadless
  • Steerer Tube Length: 163mm
  • Fork Rake/ Offset: 28mm
  • Axle to Crown Length: 315mm
  • Crown Race: Built-In for 45°X45° bearings
  • Dropouts: Investment Casted CRMO 6.0mm
  • Complete with AL. compression bolt
  • Weight: 34.8 oz
  • Full 100% 4130 Heat-Treated CR-MO
  • Top Cap Thread: M25
Log in for shop prices

Demolition Parts Royal Park Fork

Categories: , , .
fork-royal1
  • Light Weight Park Fork
  • Full 100% 4130 Heat-Treated CR-MO
  • Ultra Tapered Legs
  • Height: 315mm
  • Built-in Race
  • One piece heat treated CR-MO steerer
  • Built-in steerer race
  • Butted Steerer Tube Length: 163 mm
  • Fork leg slot for peg clearance
  • 4mm Thick Welded Drop Outs
  • Dropout Offset/rake: 26 mm
  • Complete with AL. compression bolt
  • Weight: 29.8 oz
Log in for shop prices

Demolition Parts Kris Fox Fork

Categories: , , , .
fox-fork-black-jacket
  • Kris Fox Signature Fork
  • Full 100% 4130 Heat-Treated CR-MO
  • Tapered Legs
  • Built-in Race
  • One piece steerer
  • Steerer Tube Length: 163 mm
  • Fork leg slot for peg clearance
  • Investment Cast Dropouts
  • Offset: 28 mm
  • Complete with AL. M25 compression bolt
  • Weight: 37.5 oz
Log in for shop prices

Demolition Parts Dennis Enarson 24mm Rig Cranks

Categories: , , .
rig-crank-black-jacket
  • Heat Treated CRMO arms with built in ridge face for added strength and stiffness
  • Forged 24 mm X 48T splined boss that sites flush to prevent ankle scarring
  • 24 mm X 48T splined heat treated CRMO spindle
  • CRMO spindle bolts with 3/8″ ratchet and 6 mm allen keyed by CNC’d
  • 24 mm Mid BB bearings, cones and watchers NOT INCLUDED
  • Available sizes: 170 mm and 175 mm
  • Weight: 31.6 oz. (175 mm)
Log in for shop prices

Demolition Parts Revolt Cranks

Categories: , , .
revolt-black-jacket
  • Sizes (mm): 170 & 175
  • Spindle: 19mm Hollow/ Heat Treated Chromoly
  • Spindle Bolts: 3/8″ x 24T Flush Mount
  • Spindle Splines: 48
  • Sprocket Bolt: 10×1.5mm
  • Weight: 22.2 oz (175mm arms only)
Log in for shop prices