Shop

Showing all 17 results

Volume Broc Raiford Captain Bar

Categories: , , .
bar-captain-glacier-blue
  • Broc Raiford Signature Bar
  • Rise: 9″ & 9.25″”
  • Width: 28.5″
  • Backsweep: 10°
  • Upsweep: 2°
  • Crossbar OD: .75″
  • Crossbar Height: 6.75″
  • Crossbar Width: 11.3″
  • Material: 13 butted, heat treated CRMO. Thickest point is 1.8t (.070)
  • Weight: 33.5 oz
Log in for shop prices

Demolition Parts Paradise Bar

Categories: , , .
paradise-bar-blk-jacket
  • Tyler Fernengel Signature Handlebar
  • “Send It” sticker on the crossbar exactly like Tyler’s bars
  • Rise: 8.75″ & 9.25″
  • Width: 28.5″
  • Backsweep: 11°
  • Upsweep: 1°
  • Crossbar OD: .75″
  • Crossbar Height: 6.3″ (8.75″) 7″ (9.25″)
  • Crossbar Width: 11″ (8.75″) 11.7″ (9.25″)
  • Material: 13 butted, heat treated CRMO. Thickest point is 1.8t (.070)
  • Weight: 33.2 oz (9″)
Log in for shop prices

Demolition Rig Bar

Categories: , , .
rig-blk-jack
  • Dennis Enarson Signature Bar
  • Rise: 9″ & 9.25″”
  • Width: 29″
  • Backsweep: 12°
  • Upsweep: 2°
  • Crossbar OD: .75″
  • Crossbar Height: 6.5″ (9″) 6.75″ (9.25″)
  • Crossbar Width: 11.28″ (9″) 11.3″ (9.25″)
  • Material: 13 butted, heat treated CRMO. Thickest point is 1.8t (.070)
  • Weight: 34 oz
Log in for shop prices

Demolition Parts V2 Headset

Categories: , , .
headsets2
  • 1/8″ Integrated
  • Campy 45ºX45º
  • 8mm & 10mm Stackable Cone Spacers Included
  • Weight: 2.6 oz
Log in for shop prices

Demolition Parts Tripod Post

Categories: , , , .
tripod post
  • 6061 Aluminum
  • Includes Wedge Piece
  • Length: 190mm (7.5″)
  • Weight: 4.5 oz
Log in for shop prices

Demolition Parts V2 Seat Clamp

Categories: , , , , , , .
v2 lightning bolt seat clamp
  • Made from aluminum with a single bolt clamp design
  • 1  1/8”
  • Weight 0.9 oz
Log in for shop prices

Demolition Parts Dennis Enarson 24mm Rig Cranks

Categories: , , .
rig-crank-black-jacket
  • Heat Treated CRMO arms with built in ridge face for added strength and stiffness
  • Forged 24 mm X 48T splined boss that sites flush to prevent ankle scarring
  • 24 mm X 48T splined heat treated CRMO spindle
  • CRMO spindle bolts with 3/8″ ratchet and 6 mm allen keyed by CNC’d
  • 24 mm Mid BB bearings, cones and watchers NOT INCLUDED
  • Available sizes: 170 mm and 175 mm
  • Weight: 31.6 oz. (175 mm)
Log in for shop prices

Demolition Parts Revolt Cranks

Categories: , , .
revolt-black-jacket
  • Sizes (mm): 170 & 175
  • Spindle: 19mm Hollow/ Heat Treated Chromoly
  • Spindle Bolts: 3/8″ x 24T Flush Mount
  • Spindle Splines: 48
  • Sprocket Bolt: 10×1.5mm
  • Weight: 22.2 oz (175mm arms only)
Log in for shop prices

Demolition Parts Merit Sprocket

Categories: , , , .
merit
  • Available Teeth: 25t, 27t, 28t & 30t
  • Teeth: 1/8″
  • Bore: 15/16″
  • Splined or Bolt Option
  • Splined Option: 19mm 48 Splined
  • Bolt-On Adapter: 19 & 22mm included
  • Weight: 1.9 oz (25T)
  • *Cranks & Chain Not Included
Log in for shop prices

Demolition Bulimia V3 Hub

Categories: , , .
bulimia-v3-2
  • Slider Front Guard sold separately & pops right on top of the cone
  • Spacing: 100 mm
  • Front Axle Type: 3/8″ Male Heat Treated CR-MO
  • Hub Flange Diameter: 38 mm
  • Hub Center to Flange: 34 mm
  • Weight: 7.6 oz.
  • *Logos May Vary
Log in for shop prices

Demolition Ghost V2 Hub

Categories: , , .
ghost-blk-jacket
  • Spacing: 100 mm
  • Front Axle Type: 3/8 Bolt On Female
  • Hub Flange Diameter: 38 mm
  • Hub Center to Flange: 34 mm
  • 7075 AL Thread on Hub Guard Sold Separate
  • Slider PC Front Guard Sold Separate (PC pops right on top of the cone)
  • Weight: 9.6 oz.
Log in for shop prices

Demolition Rogue Cassette Hub

Categories: , , .
rogue
  • Spacing: 110 mm
  • Rear Axle Type: 14mm
  • Hub Flange Diameter: 27 mm
  • Hub Center to Flange: 49 mm
  • Axle ends come with allen key insert for easy installation
  • Available in RHD & LHD
  • Available in either 9t or 10t drivers
  • 7075 AL Thread on Hub Guard Sold Separate
  • Weight: 14.4 oz (w/ 9t CR-MO driver)
Log in for shop prices

Demolition Rolls V2 Hub

Categories: , , .
rolls v2 straight male
  • Spacing: 110 mm
  • Rear Axle Type: 14mm
  • Pitch Center Diameter (PCD): Drive side: ø51.5mm Non Drive Side: ø45
  • Hub Center to Flange: 27 mm
  • Hub Shell Bearing Type: QTY-2 #6902
  • Available in either 9t or 10t drivers
  • Comes stock as RHD
  • Sold separate: Solid 14mm axles & 7075 AL screw-on hub guard
  • Weight: 15.6 oz (w/ 9t CR-MO driver)
  • *Female Rear Hubs Not Recommended For Peg/Grind Use
Log in for shop prices

Demolition Rotator V2 Hub

Categories: , , .
rotator-black-jacket
  • Spacing: 110 mm
  • Rear Axle Type: 14mm Solid
  • Pitch Center Diameter (PCD): Drive side: ø57.5mm Non Drive Side: ø57.5
  • Hub Center to Flange: 26.4 mm
  • Hub Shell Bearing Type: 6002 (x1) non-drive side, 7905  ACB (x1) drive side
  • RHD or LHD
  • Includes 3 slack adjustment washers that adjusts freecoaster slack
  • Click HERE to view slack degrees you can get by adding or taking out slack washers
  • Available in 9t driver only. Driver Bearings: Qty 1- 7802-14 & 1 needle bearing
  • Sold separate: Solid 14mm axles & 7075 AL screw-on hub guard
  • Weight: 23 oz (w/ 9t CR-MO driver)
Log in for shop prices

Demolition Rolls V2 Hub *CLEARANCE

Categories: , , , .
rolls v2 female
  • Spacing: 110 mm
  • Rear Axle Type: 14mm
  • Pitch Center Diameter (PCD): Drive side: ø51.5mm Non Drive Side: ø45
  • Hub Center to Flange: 27 mm
  • Hub Shell Bearing Type: QTY-2 #6902
  • Available in either 9t or 10t drivers
  • Comes stock as RHD
  • Sold separate: Solid 14mm axles & 7075 AL screw-on hub guard
  • Weight: 15.6 oz (w/ 9t CR-MO driver)
  • *Female Rear Hubs Not Recommended For Peg/Grind Use
Log in for shop prices

Resist Contact Fixed Cassette Hub

Categories: , , , .
contact
  • 36h low flange 6061 Al. Hub Shell
  • 2 Oversized #6902 Bearings
  • Spacing: 120 mm
  • Straight Hollow Axle 14mm Heat Treated CRMO w/ Allen Key Insert for Easy Installation
  • Hub Flange PCD (Pitch Circle Diameter): 51.5 mm
  • Hub Flange Diameter: ø60.5 mm
  • Hub Center to Flange Center: 31.5 mm
  • Flange Center to Flange Center: 65 mm
  • Hub Spoke Hole Diameter: ø2.5 mm
  • Weight w/ Drivers: 16.7 oz. (9t) & 16.9 (10t)
Log in for shop prices

Resist Icon Rear High Flange Hub

Categories: , , , .
icon
  • 36h high flange al. hub shell
  • 4140 heat treated, CR-MO 14mm and or 14mm slotted axles.
  • Spacing: 120mm
  • Hub Flange Diameter: ø62 mm
  • Hub Center to Flange Center: 31.5 mm
  • Flange Center to Flange Center: 63 mm
  • Hub Spoke Hole Diameter: 2.5 mm
  • Weight: 16 oz.
Log in for shop prices